PERFECT FIT Oval Frames for Disney World Silhouettes - on Amazon!

We recently came back from the most amazing and magical trip to Disney World! It was our family’s first trip and we had such a wonderful time and learned so much along the way (separate blog post coming soon to share more on all that we learned). One of my top must-dos for the trip was to get a silhouette portrait of our girls done as a souvenir. | This post contains affiliate links |

At the time of writing this post, they currently have Silhouette Artists at Magic Kingdom and at Disney Springs. We tried twice at Magic Kingdom to get them done but the first time we went was towards the end of the day and the line was long and our kids were tuckered out so we had to skip that day. The second time we went to Magic Kingdom during the middle of the day and it was a success - a short line that moved fast and it was so amazing to watch the Silhouette Artist work! The subject sits in a chair across from the artist (many artists can also work from a side view picture if it’s a good one - they can even do pet portraits this way), and then they get to work snipping the paper with sharp little scissors. They cut two sheets of paper at once and you end up with two sets of portraits (mirror imaged). The artist did both our kids within minutes and it’s a perfect likeness to them, I was so impressed!

Afterwards when it's time to pay you have the option to buy the frames there if you would like. I had every intention of buying oval frames there but at the time they were sold out of ovals and only had rectangular frames which I just wasn't interested in. So we got our silhouettes to-go in a little gift bag (tip: it would be a good idea to bring a large ziplock bag to protect the silhouettes a little more).

When it came time to pack up and go home at the end of the week I was actually very thankful we didn't buy the frames in Disney - we traveled with carry-ons only and there was no way we would have had room for the frames in our carry-ons.

| Oval Frames that fit Disney World Silhouettes (they also come in other colors too!) |

Once we got home I shopped around online to find oval frames that fit the silhouettes. After reading a lot of mixed reviews I ordered several different frames to find the one that fit best. After some trial and error I found the PERFECT FIT oval frames for the Disney World Silhouettes right on Amazon - and they come as a set of two! It was meant to be ;)

I recommend taking out the plexiglass piece and using that as a guide to trace and cut out your silhouette to fit in the frame (I did not use the oval mat that came with the frame - and don’t forget to remove the protective plastic film from both sides of the plexiglass). It worked perfectly for us! We kept one portrait for ourselves and gave the other one to the grandparents as a thank you for house sitting for us. It’s such a special souvenir that we’ll treasure!

Disclaimer: I found that these frames fit the Silhouettes we got this year (Fall, 2024) at Disney World perfectly. I would think they should also fit the Silhouettes from Disneyland and Disney Springs too, but I cannot confirm that because I haven’t tried it yet myself.

---

Garage Locker Power Tool Organizer - Fits Between Garage Doors!

Lately our garage has been kind of a mess - my husband has been rebuilding our rotting deck and the power tools he has have multiplied with no good place to store them. I was getting tired of tripping over sanders and planers so I thought I’d come up with a way to get all the small power tools easily accessible and organized for his project. In my search I came across the perfect locker solution! | This post contains affiliate links |

I realized the space between our garage doors was vastly underutilized. It’s a skinny spot but tall - with a lot of potential for easily-accessible storage. I thought about building shelves there but then it would be open and kind of messy. I tried finding a cabinet that would fit but they were all too wide. Then I realized a locker would fit!

I searched for single-width lockers and found many options and considered doing a single tall locker or a double locker. But then I came across this amazing single-width locker with six doors/tiers! It was perfect for my needs - it fit right in between the garage doors and each tool could have it’s own cubby. This locker fit perfectly in our garage but make sure to measure your space first as you may have a narrower (or wider) space to work with. There was assembly required for the locker but it went together easily and then it was ready to use!

One important thing to consider before you put a locker in your garage is how you will contend with wet floors. We live in New England and in the winters especially our garage floors get quite wet when the snow melts off our cars… in order to protect the bottom of your locker from rusting you probably want to raise it up off the floor. For us we used a thick paving stone that fit well under the locker - though we did have to level it some with composite shims (similar ones linked) because our garage floors are slightly uneven. (Just slide the shim under the paver and break off when it's the right height - so easy!) You may also want to consider attaching your locker to the wall in some way if you’re concerned about it tipping.

| 6 Door Metal Locker |

Once we had our locker level and secured I labeled each cubby with what it contained (“Drills & Bits”, “Orbital Sander”, etc). To make the labels I just typed them up on my computer, printed them out on a sheet of cardstock, and cut them out.

This was an awesome and very easy project to do in our garage. We love how organized and accessible the tools are while still keeping them out of sight.

"Anything But a Backpack" Day Ideas

Having worked at a middle/high school for a few years now I’ve experienced a few “Anything But a Backpack” Days for Spirit Week and they can be pretty hilarious. …What does that mean? you might wonder - well, it pretty much means what it says - leave your backpack at home that day and come up with a creative way to carry your things around school for the day. I thought I’d share a list of some of the favorites I’ve seen or have heard about form others - some are quite creative and ridiculous. Disclaimer: always make sure you check with your school for any parameters or rules for this event as every school will have different expectations as to what’s acceptable or not.

“Anything But a Backpack” Day Ideas

• laundry basket

• hamper

• stroller

• car seat

• remote control car

• PowerWheels

• wagon

• toy shopping cart

• real shopping cart

• Easter basket

• pizza box

• toolbox

• bucket

• a really ugly/tacky purse or bag (can be found cheap at a local thrift shop!)

• tool chest

• mini fridge

• microwave (that has to be heavy!)

• a car bumper (very tricky to put your stuff in - and yes, I have seen this one myself!)

• a kayak

• a canoe (very awkward to get up the stairs)

• golfbag

• milk crate

• horse saddle bag

• office chair

• cooking pot

• cat carrier

• birdcage

• wheelbarrow

• guitar case

• suitcase (the ones with the wheels are handy!)

• fishing net

• traffic cone

• stuffed animal that has a zippered pocket

• trick-or-treat bag or container

• trash bag or trash can (just make sure your stuff doesn’t get thrown out by accident!)

Check out our Spirit Week Theme Day Ideas blog post for other theme day ideas!

Disclaimer: Always make sure you check with your school for any parameters or rules for this event as every school will have different expectations as to what’s acceptable or not. This list is for ideas/entertainment purposes only.

---

Sheet and Towel Stripping How-To

While home for Quarantine, I’ve seen a lot of people posting about “stripping” their towels and bedsheets and showing disgusting After photos of dirty water - I was intrigued! Stripping the linens is supposed to get rid of any kind of build-up on them (whether that’s laundry detergent, body oil/sweat, hard water mineral deposits, etc). So I decided to give it a try myself and share the easy process - and let me tell you, it was a disgusting and oddly satisfying Quarantine Project. | This post contains affiliate links |

Apparently one should consider stripping their linens when they aren’t as absorbent as they used to be, they look or feel dingy, or they start to smell musty.

Supplies:

Everyone seems to be using more or less the same supplies, which are:

• 1/4 cup Borax Powder
• 1/4 cup washing soda (or 1/4 cup baking soda if you're in a pinch and don't have washing soda.. I used baking soda)
• 1/2 cup laundry detergent

How-To:

Fill a bath tub with hot water and dissolve the Borax, washing soda or baking soda, and laundry detergent in it. Next add your towels and sheets (make sure to only do similar colors together… in some cases it can cause some colors to run. We only have done our white and light colored linens so far.)

Then leave them to soak for the next four or so hours, stirring occasionally. You should see the water turn from clear to a gross yellowish-dirty color.

Once the water cools, drain the tub and squeeze the water from the linens, rinsing them with some fresh water. Then put in the washing machine (with no detergent - your items will already have absorbed detergent and Borax and you want to rinse everything out, not add more soap at this point), and run through the “wash” cycle to rinse everything out thoroughly.

After that you can put them in the dryer, or re-run the washing machine with detergent like you normally would to give them a fresh wash before drying.

Draining the dirty water after stripping. Ew.

| Whale Bath Spout Cover |

Our Personal Results:

So it wasn’t the magical night-and-day change across the board that I was expecting, visually anyways - and some items definitely had better results than others. OVERALL - Our linens definitely felt cleaner, and looked a little brighter - however, our old white towels (which have turned very off-white over the years), did not magically turn luminous white again like I was hoping. But again, that’s probably too much to expect as they are 10+ years old and have had many years to get discolored in the regular laundry. Nevertheless, just SEEING the dirty water after we stripped the linens makes me feel a lot better about doing this process - visually not everything looks perfectly white again, but I KNOW it’s cleaner after removing all that invisible gunk and that makes me feel a lot better.

Okay, so the old white towels are still off-white, but I know they’re cleaner than before after seeing the dirty water after the stripping process.

It’s my understanding that you can repeat this process as needed, and I can see myself doing this maybe up to 2-4x per year going forward to try to keep build-up at bay.

Disclaimer: Try at your own risk. In some cases this process may make colored fabrics run and may not be suitable for all fabrics.

Want to see another satisfyingly gross example…?

Here’s a photo my sister sent me after she did her sheets - wow!

---

Related Posts:

• The Easiest Way To Clean Your Shower Curtain Liner

• How “Clean Kitchen at Night” Changed My Life

---

DIY Ribbon and Trophy Display

It seems kind of weird and petty to write about fun DIY projects during a Pandemic, but maybe fun projects to work on at home is just what we need right now :) I did this project about two months ago when I was looking for a nice way to display our oldest’s growing collection of award ribbons and medals but couldn’t find a display setup that I liked or was remotely affordable.
The whole project was super easy and done start-to-finish within two days. Here’s hoping for things to go back to normal someday soon so she can continue to add to her award collection. | This post contains affiliate links |

Materials:

• lumber (I used a 1x8" board for the shelf top and 1x6" board for the back)
• two decorative shelf brackets (or two pieces of wood cut at 45 degree angle)
• dowel
• two small hooks (these are very similar to the ones I used)
• orbital sander or sandpaper
• screws
• stud finder
• level
• primer
• paint

How-To:

First decide how long you want the overall shelf to be (in our case I decided on making it 3ft wide). Then cut your shelf top to that length.

(Nothing is screwed in yet here… just laying everything out to make sure it will fit like I want it to.)

Next decide how wide you want the shelf back to be - remember that the self back plus the brackets should fall within your overall shelf top length. Ultimately how long you cut the shelf back is your preference though. But visually I think that the shelf back and the brackets look best if they fall within about 2 inches of the shelf top on each side.

(Side note: If you have a router you can cut a dovetail channel along the back of the shelf back now to make for easier hanging… I do not have one of those handy so I skipped this step and will hang our shelf another way.)

Once you have everything laid out, cut your dowel to about 1/8” less than your shelf back length so it will fit comfortably within that space.

After everything is cut, I recommend sanding everything first before you assemble. I love using our orbital sander - it makes for quick work and does a nice job.

Next start assembling. Screw the shelf supports to the backing first, making sure everything is lined up and flush.

Next carefully center the shelf top, making sure it’s flush with the back and screw in.

Now for the fun part - paint! I did one coat of primer and then three coats of semi-gloss white paint, though you could choose any color you wish. I like semi-gloss paint since it has a slight sheen to it and is easier to dust and keep clean.

For hanging - first I measured this wall side-to-side to figure out where the shelf should fall within that space to be centered. Then I marked the studs with a stud finder.

To be honest I usually use two different kinds of stud finders when I have to hang something - I use a magnetic stud finder first to identify exactly where the stud is and then a digital one to find the edges of the stud. I’ve found that sometimes the digital ones can be finicky so it’s nice to know where the studs are first rather than get a false stud reading when it could be something else (a pipe, a thick area of plaster on the wall, etc).

Then using a level to make sure the shelf was level, I screwed directly into the wall studs through the shelf back making sure to place the screws where they would be hidden by the dowel once I installed it.

Next I hung the dowel by centering it and adding a simple hook to support it on each side, as shown above (this also hides the screws I used to hang it). And now the project is finished and ready to display ribbons, medals, and trophies!

To hang the ribbons and medals you can easily lift the dowel up and string them on, or loop them around the dowel like I did here.

I hope you liked the project and we look forward to when this Pandemic is over and there will be sport and fair ribbon awards again - stay well!

UPDATE:

Years later our kids are still using the DIY Ribbon and Trophy Displays but they’re getting a little full. In order to spread things out a bit I bought these simple medal holders (similar one linked), so they could hang their medals on these and keep the DIY Display just for their ribbons/trophies. It’s working great!

---

Similar Posts:

---

How we Turned a Coat Closet into a Functional, Organized Pantry

Our kitchen was lacking a pantry, so we often kept canned goods and backstock on a shelving unit at the foot of our stairs in the basement. But because half of our food and snacks were downstairs and half were upstairs it made for frequent mistakes when buying groceries… it was hard to visualize exactly what we had and where so we often ended up overbuying certain things and forgetting to buy others. Tired of wasting money, food, and time running up and down the stairs I decided to make over a coat closet into a functional pantry. | This post contains affiliate links |

Now while this coat closet (pictured below) was pretty jammed full, it was very underutilized. It’s where we kept our off-season coats, hats, and boots as well as some hiking gear and my daughters’ Art Cart - most things we did not need to use daily, or often at all. My solution to this was to relocate all these items to our basement - I hung a closet rod under the basement stairs and moved all our off-season clothing and gear to this new space where it was still easily accessible but out of the way.

| Adjustable Closet Rod I used for under the basement stairs |

Coat Closet - BEFORE

Relocated off-season gear to basement

The next step was to pull out the old wire shelf and closet rod system, patch the holes, and repaint the inside of the closet. Thankfully I already had spackle and some leftover white paint so I was able to get the closet to a clean slate easily and it didn’t cost a dime.

Now for the fun part! I got to decide how many shelves I wanted and the spacing, so I laid it out with painters tape to play with how I wanted it before I made a final decision. For our setup I decided on four shelves starting at about waist-height. I wanted to leave the bottom open to accommodate the dog food bin, the Art Cart, step stool, etc. Then I screwed in 1x3 inch “runners” that would support the shelves along the back wall. I used a stud finder to make sure I was screwing the runners into studs and a level to make sure everything was square.

Then I added runners to one side of the closet next, following the same routine - but with these pieces I had pre-drilled pocket holes with our Kreg Jig first so it would make for a clean and secure joint in the corners.

Before installing the runners on the opposite side of the closet, it’s wise to keep in mind how you will be able to maneuver the shelf boards in once all the runners are in place (it would be very difficult to get the top shelf in with all the runners installed, for example). So before installing the opposite side’s runners I slipped some of the trickier shelf boards into place first (I used 1x12”s cut to length for the shelves) before I finished screwing in all the side runners.

I secured the shelves into place with some finishing nails, then taped off the shelves and runners to get ready for paint. I used primer and then several coats of white semi-gloss paint since it’s a little easier to wipe down and keep clean.

I just love how farmhouse and “Shaker” the exposed rails on the sides look and I wanted to play it up. Once the paint was dry I added some functional hooks to hang aprons, lunchboxes, etc on the side rails.

| Skip Hop Fox Lunchbox | Similar Style White Metal Farmhouse Basket | OXO POP Containers |

And now the project is complete! I am so happy with how it turned out and it’s wonderful to have everything in one place. I can see this project saving us money on groceries in the long run now as everything will be in one place now and we’ll be less apt to waste food.

Eventually, I would love to replace the closet door with a fun screen door and get some more glass jars and baskets for a cleaner looking pantry - but all in good time.

| Similar Clear Plastic Storage Bins | Dog Food Container (on the floor, just out of the picture) |

| Similar White Metal Craft Cart | Small Wire Baskets | Similar Clear Plastic Storage Bins |

| Flour, etc. jars were made using Cracker Jars with custom vinyl labels I made on my Cricut | Vintage Pie Tins |

Over this past winter I added a few simple add-on organizers to our pantry to maximize the space and love how functional they are. Here they are below (and please excuse the glimpses of clutter in the pantry… as it now holds extra groceries and our family board games too - because, real life):

Additional Storage for the Walls

| Similar Wire Wall Basket | Mason Jars to store Trail Mix |

Under-Shelf Storage

| Wire Under-Shelf Basket - Perfect for Storing Potatoes! |

Decal for Pantry Door

It turns out our door is an odd size and in order to get a screen door for it we would have to custom order one (at a cost of about $300+! Yikes). So instead I decided to cut a custom vinyl label to stick to the door to make it more finished. I could have designed my own but I found a design I really liked on Etsy and bought the digital design file. After purchasing the design file, I used my Cricut and 651 Permanent Vinyl to make the label and then transferred it to the door. In hindsight I probably should have made it slightly smaller, but overall I love how it came out and how budget-friendly it was since I already owned a Cricut Machine and the vinyl.

| Pantry Digitial Design File | Cricut Machine | 651 Permanent Vinyl in Matte Black |

Back of Door Organizer

Finally, we decided to add a ClosetMaid Adjustable Organizer to the back of the pantry door to fully utilize the space. It was very simple to install and I am impressed with how sturdy it is once it's assembled and screwed in. We used the lower baskets for foil, parchement paper, ziplocks, silicone bowl covers, etc. The middle baskets we designated for frequently used canned goods, smoothie mix-ins, as well as salad fixings and rice cakes. Finally on the top two baskets we put convenience foods that we rarely use since I'm so short. Note: If you have a hollow-core door, you might want to use a specialty set of anchors/screws to attach it to the door for stability, rather than just screw into the door with regular screws.

| ClosetMaid Adjustable Organizer (18 inch) | True Nature Silicone Food Covers |

Stackable Canned Goods Organizer

Another later addition to our pantry organization are these amazing stackable can racks for organizing canned goods. Before I had quite a few canned goods just sitting on the floor of the pantry and in a separate kitchen cupboard, but I never could see everything at once and often cans in the back got forgotten -- Now everything is in one spot where I can see them and I can meal plan more efficiently.

| Stackable Can Rack Organizer (I have two racks stacked here) |

OXO POP Containers with Scoops for Snacks

Another thing that's been a huge game changer is moving dry snacks into OXO POP Food Storage Containers. We love these for our snack crackers and pretzels. They keep everything fresh and it's easy to see if you're starting to run low on these staples. To keep the kids from going too wild with serving sizes we added clear OXO 1/2 Cup Scoops in each container too - making it easy to grab a serving.
I used my Brother Label Maker to make labels for the containers. These can easily be peeled off and relabeled as needed.

| OXO POP Food Storage Containers | OXO 1/2 Cup Scoops | Brother Label Maker |

Disclaimer

This website shares personal opinions and experiences regarding a variety of topics. Please do your own research regarding all things and use information/opinions stated here at your own discretion and risk.

---

---

Check out our Related Posts:

DIY Potting Bench - Based on Plans by Ana White

I’ve been wanting a potting bench for a while now - something by the back door to display some decor, use as an outdoor work station, and double as a place for UPS to leave packages. After looking around online and at local stores, I couldn’t find anything that I liked that fit the narrow space - so I did what any #woodworkingmom would do, I decided to build it myself. | This post is not sponsored but does contain affiliate links |

{ Note: The plans I worked from were from Ana White and can be found HERE }

I came across these Ana White plans for a Simple Potting Bench on Pinterest and thought it was perfect! It was exactly the simple, rugged style I was looking for and easy to tailor to our space too. Most of the wood needed were 2x4’s, which are sturdy and cheap - and thankfully between our garage and my father-in-law’s garage we had all the wood scraps I needed to piece together this project. Since I used leftover wood we already had, this project cost me nothing which was pretty amazing!

Since I only used what wood we had on hand, I had to make do - some of the wood was pressure-treated, some was not, some had knot holes or gashes, and not all of it was “true” (straight). But that was fine by me as this was to be a rustic piece for outside.

Before I started building, I followed Ana White’s “cut list,” cutting and making piles of all the wood in the dimensions I would need to build the project. I carefully chose the lumber for each section to minimize how the knot holes, gashes, or crooked pieces would be seen in the final piece. For our potting bench I made it 4 inches narrower so it would fit against the small wall next to our back door and because of this I had to adjust my cut list and refigure some of the overall dimensions.

The next step was constructing the shelves individually - attaching the outer planks first, checking for square, then spacing out the middle planks and attaching them. To build this whole project I used an Impact Driver, which made the entire project go much quicker and easier.

To attach the legs, I laid the project on it’s side and carefully measured the distances between the legs as well as up the legs before attaching the shelves to makes sure everything would be as level and as square as possible.

Finally to make the project look more “finished” I added some wood scraps to the sides of the project to conceal the butt ends of the shelves and make it look a little more polished.

I also decided to add some 1x3”s to the front of the shelves to make it look a little more polished from the front as well. (I did not counter-sink these screws, but I should have as they were more noticeable than I was expecting in the finished piece.)

Then came time for painting - I chose to paint the whole potting bench in several coats of my favorite Valspar Stainblocking Bonding Primer/Sealer. This stuff has great coverage and really covers and seals well. My one regret was not giving all the wood pieces a single coat of paint before assembling - as once everything was assembled it was a huge pain to get in all the nooks and crannies.

Finally I finished the project by adding a few little hooks underneath the shelf (very similar hooks linked here), from which I can hang tools or decor. I’m really happy with how this came out and how quickly it came together. I can’t wait to decorate it with some plants come next spring!

PS - I’m thinking this potting bench would also be great for parties and BBQ’s! It would be perfect on a patio or deck as a makeshift buffet table.

UPDATE: Spring, 2020

Just wanted to give a quick update after I made the potting bench last Fall: Over winter we decided to store it in our shed, just so we wouldn’t have to snow blow and shovel around it all winter, but as soon as the threat of snow passed in early Spring we brought it right back out. It’s been wonderful to have for planting and working on outside this spring, and due to the current Pandemic situation we’re getting more packages than ever so it’s great to have a designated spot for deliveries (and right in view of our security camera too).

For decor right now I'm keeping it very simple, especially since the potting bench is utilized daily for mail - there's just a garden rock, a metal barn star (hung from a special hook that doesn't damage vinyl siding), and a small potted lavender plant with an American flag - all items we already had around our house.

Summer, 2020 - sharing another little decor update for the potting bench:

I found this weathered piece of wood in our scrap bin and thought it would make a cute sign for the potting bench. I used my Cricut Machine to design and cut a stencil that said "Fresh Cut Flowers 5¢" and used it to paint the sign. I think it looks cute and it's a great finishing touch!

---

Check out our Similar Posts:

How to Hang Decor on Vinyl Siding - with NO DRILLING! (Tips for Brick Surfaces Too)

I’ve been wanting to hang a few decorative signs on the outside of our house… a welcome sign by the door and this “gather” sign on our back deck. However, with vinyl siding I was very hesitant… I didn’t want to drill into it or make a mess of it. Which is why I was so happy when I came across this incredibly simple, no tools needed solution!
| This is not a sponsored post, but an honest independent review of a product. This post contains affiliate links |

Vinyl Siding

After some searching on Amazon I came across these "No-Hole Hooks" and it seemed to be the perfect solution! These are special stainless-steel hooks that are meant to "roll" under the lip of your vinyl siding and hang lightweight decor. Just what I needed!

I measured out the distance between the hangers on the back of my sign, placed the hooks at the correct distance, and hung the sign - ta-da! It couldn’t have been easier! I’m really happy with how easy it was.

It seems that as long as you have good condition (not sun brittle), quality siding and hang only light-weight items, this would be a great solution over drilling into your siding. I also love that if we decide to take down the decor, it leaves no holes behind!
I’ve had these signs up for a few months now and I’ve been really happy with how these have worked and held up.

| "No-Hole Hooks" | "gather" sign available from my Etsy Shop |

Bricks

Similarly there is a no-drill product to hang items on bricks too! We do not have any brick surfaces at our home, so I personally haven't tried them myself but these Brick Hook Clips are well rated and meant to hang decor on brick surfaces, indoors or outdoors. Just make sure to follow the manufacturer's instructions regarding installation and weight limits.

| "Brick Hook Clips" |

Disclaimer: This is not a sponsored post, but an honest independent review of a product. Always follow manufacturer’s guidelines when using and use product at your own risk. Not liable for any damages or improper use.

---